Why Choose Aero-Flex For your ASME Piping Assemblies?
ASME Pipes & ASME Piping Systems
Experience Is Key:
Aero-Flex has extensive experience in fabricating complex custom piping assemblies and full piping systems. You can find out piping systems and assemblies on some of the largest oil & gas and power turbine companies in the world including GE Power and GE Oil & Gas along with Pratt & Whitney Power Systems among others.
We have a certified NDT expert on staff to perform penetrant inspections when required. Our CWI (certified weld inspector) is on the floor throughout the fabrication process making sure all welds are performed within spec and all assemblies get a final check for accuracy in quality before being signed off for shipment to our customers.
The Aero-Flex Touch:
After welding our piping assemblies are individually pressure tested and cleaned inside and out. During cleaning we apply a de-greaser to clean the pipe and a pickling acid on the welds. The pickling acid pulls the carbon out of the weld and brings it to the surface. Then we scrub the welds to remove the carbon and other impurities. This ensures your weld will not rust and be shiny for years to come. Take a look at the pictures and see how they look after pickling.
In any event you can’t have just anyone fabricate your piping system. The Aero-Flex team has over 75 years of experience in these types of metal fabrication applications and the specifications required to deliver a piping system that will perform to your expectations.
To see some examples of some of our piping projects please go to our gallery page.
What Is ASME Process Piping?
ASME’s piping code provides specifications for the design requirements of high pressure piping. This is to ensure that the pipe can safely meet the demands and stresses that will be placed on it while in service. The code also sets standards for material selection, support design, thermal expansion, examination, and testing. Corrosion resistance is a major factor for pipe fabrication. The corrosion resistance required affects the pipe wall thickness and the selection of pipe materials. An ASME pipe process uses different subsections to address corrosion allowance for different piping specifications (PS). These are specified by the PS-number.
Connections in pipes are among the most common sources of failure. ASME piping process addresses what types of connections are permitted and what type are not. It also addresses when welded branch connections will need to be reinforced and what types of welded fittings may be used. Butt-Weld Pipe fittings and flanges are covered in ASME with specifications for temperature requirements, materials, and pressures. Typically ASME B16.5 pipe flanges are used where flanged connections are required. Pressure testing is crucial to ensure the integrity and performance of your piping assembly. ASME sets hydrostatic test limits that specify different minimum test pressure specifications for different design pressures and temperatures. Hydrostatic testing may need to be performed on fittings, valves, and instruments separately to ensure compliance.