Flanged pump connector hose
Vibration-Resistant Water Hoses With Flanges
This type of hose is also known as a flanged pump connector hose. These hoses are sized to a specific length for attaching to pumps. Its flexible braided construction absorbs vibration to reduce wear and tear on equipment. To connect these hoses you need to bolt two same-size flanges together. You will also need a gasket to complete the seal.
Temp Range: 50° – 800°F ( MAWP reduces at higher temperatures)
Hose Material: 321SS core with 304SS single layer of braid
Flanges: 304SS Slip-On Plate Flanges 150#
Note:Flange OD and Drilling ONLY per ASME B16.5. For sizes 4″ and greater refer to AWWA C207 Class B, D Plate Flanges. Plate Flange material conforms to the ASTM A240 Standard.
|Pipe Size ||ID ||Bend Rad. (Static) ||# Of Bolt Holes ||Hose MAWP @ 70° F ||Length |
|2″ ||2″ ||5.00″ ||4 ||450 psi ||9″ |
|2 1/2″ ||2 1/2″ ||8.00″ ||4 ||340 psi ||9″ |
|3″ ||3″ ||9.00″ ||4 ||290 psi ||9″ |
|4″ ||4″ ||13.00″ ||8 ||250 psi ||9″ |