Pump Hose Connectors
Vibration-Resistant Water Hoses With Flanges
This type of hose is also known as pump hose connectors. These hoses are sized to a specific length for attaching to pumps. Its flexible braided construction absorbs vibration to reduce wear and tear on equipment. To connect the pump connector hoses you need to bolt two same-size flanges together. You will also need a gasket to complete the seal.
Temp Range: 50° – 800°F ( MAWP reduces at higher temperatures)
Hose Material: 321SS core with 304SS single layer of braid
Flanges: 304SS Slip-On Plate Flanges 150#
Note:Flange OD and Drilling ONLY per ASME B16.5. For sizes 4″ and greater refer to AWWA C207 Class B, D Plate Flanges. Plate Flange material conforms to the ASTM A240 Standard.
| Pipe Size | ID | Bend Radius (Static) | # Of Bolt Holes | Hose MAWP @ 70°F | Length |
|---|---|---|---|---|---|
2" | 2" | 5.00" | 4 | 450 psi | 9" |
2 1/2" | 2 1/2" | 8.00" | 4 | 340 psi | 9" |
3" | 3" | 9.00" | 4 | 290 psi | 9" |
4" | 4" | 13.00" | 8 | 250 psi | 9" |
NPT Pump Connector Hose
Vibration-Resistant Water Hoses With NPT
This type of hose is also known as a threaded pump connector or water pump hose connector. These hoses are sized to a specific length for attaching to pumps. Its flexible braided construction absorbs vibration to reduce wear and tear on equipment.
Temp Range: -50° – 800°F ( MAWP reduces at higher temperatures)
Hose Material:321SS core with 304SS single layer of braid
Male NPT: 304SS
| Pipe Size | ID | Bend Radius (Static) | Hose MAWP @ 70°F | Length |
|---|---|---|---|---|
1/2" | 1/2" | 1.50" | 990 psi | 6.5" |
3/4" | 3/4" | 2.25" | 750 psi | 7" |
1" | 1" | 2.75" | 600 psi | 7" |
1 1/4" | 1 1/4" | 3.50" | 570 psi | 8.5" |
1 1/2" | 1 1/2" | 4.00" | 410 psi | 9" |
2" | 2" | 5.00" | 450 psi | 9" |
2 1/2" | 2 1/2" | 8.00" | 340 psi | 9" |
3" | 3" | 9.00" | 290 psi | 9" |
4" | 4" | 13.00" | 250 psi | 9" |